We will reply to your message within an hour.
More
The insulation on these cords resists water, so they can be used outdoors.
The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.
Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.
Designed for indoor applications, these cords are often used to power appliances.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
Power multiple devices with one extension cord.
Designed for indoor use, these cords are often used to power appliances.
Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.
In addition to an outlet on the end, these cords have multiple inline outlets.
Keep personnel safe from electric shock with these cords.
These self-coiling cords return to their retracted length after stretching for tangle-free storage.
A locking lever on the female socket prevents your device from disconnecting.
Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.
Change the connection style between an outlet and your equipment.
Attach these splitters to an extension cord to power multiple devices from one cord.
Hardwire one of these converters to an extension cord to keep personnel safe from electric shock.
Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.
These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.
After a power failure, these cords must be manually reset, preventing unexpected equipment startup.
Use these cords with computers, lab equipment, and office machines that have IEC connections.
The shielding blocks signal interference from nearby equipment and devices.
Power multiple devices from one power source.
Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.
Create secure, vibration-resistant connections on both ends—these cord splitters have a hospital-grade plug and locking sockets.
Plug these cords into fans that have quick-disconnect terminals.
These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.
Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.
Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.
Separately control each device plugged into these strips—each outlet has its own power switch.
The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.
Keep personnel safe from electric shock with ground fault protection.
Filters between the outlets on these strips protect computers and other sensitive equipment from external signals that interfere with the equipment’s performance.
Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.
A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.
With a rubber housing, these outlet strips withstand drops and other impact.
Connect multiple devices from a single outlet.
Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.
These curved outlet strips clamp onto a pole or table leg.
Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.
Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.
Mount these strips into standard 19" wide electronics racks and enclosures.
Install these extra-long strips onto the frame of an electrical cabinet.
Add grounding or surge suppression protection.
Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.
Power devices that have a straight-blade connection from a vehicle outlet.
Minimize the risk of electric shock by adding ground fault protection to a standard outlet.
Cover unused electrical outlets or plug prongs to protect them from dust, dirt, liquids, and other contaminants.
Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.
Use these connectors in general purpose residential and commercial applications.
Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation and grip the wire securely. Access the wire connection by opening the hinged housing.
Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.
Visually confirm that connectors have power; they have an indicating light that is visible from any angle.
Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.
Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.
Add a fuse to protect equipment from current overload.
Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.
A rubber housing protects these connectors from damage caused by drops and impact.
When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.
An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.
Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments.
Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. When mated with a receptacle, these plugs have an extra-tight fit to withstand high vibration. Also known as hospital grade plugs.
Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.
Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.
Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments.
Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.