We will reply to your message within an hour.
Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.
For a strong, secure connection, mount these hangers by welding them to a rod.
Reduce movement in your line with hangers that are more rigid than strap hangers and fit tighter around pipe, conduit, and tube than loop hangers.
Cut as much strap as you need to hang duct, pipe, and other materials.
For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.
A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.
These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.
Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.
A mounting plate provides a more secure hold at the mounting surface.
Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.
A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to disassemble it.
Suspend and route flat-bottomed objects such as strut channel and small duct.
For a secure hold on pipe and conduit suspended above the ground, these supports have a cushioned clamp provides a 360° grip while reducing vibration.
These U-shaped supports allows access to pipe and conduit after installation.
Bolt directly to a pipe flange to suspend a run of pipe above the ground.
Support lines that expand and contract. The roller on these supports compensates for movement in your line from changing temperatures.
These clamps have a fixed hanger for rigid connections.
Combine with a U-bolt or routing clamp to convey a variety of material, such as pipe, tubing, and cable raceway, at distance from floors, walls, and ceilings. The extra clearance allows access for maintenance and adding and removing lines.
Mount these brackets between two studs to support copper tubing for sink faucets and other water supply fixtures.
These ties have a loop on each end that can be twisted around each other for a secure closure.
About half the strength of medium-strength steel threaded rods, use these for light duty hanging, mounting, and fastening.
For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.
These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.
Attach the 90° eye to a surface for support and use the loop to secure the suspended material.
Attach to a threaded anchor or hole for support and use the loop to secure the suspended material.
Use the twin hooks to suspend items from two points and use the loop to secure the suspended material. For use with cable trays or signs.